Show all posts by user
Use this forum to discuss any issues regarding FlashEff 2.0 version. (currently last version)
Re: stop timeline until the end of a transition? - 12 years ago
Yes, on transitionStart event on flasheff you need to call stop method and on transitionEnd you will need to call nextFrame method. This applies for action script usage. If you are working on timeline directly there is no point of doing this.by kneo - FlashEFf Nano
Re: FlashEff2 not showing when exporting swf - 12 years ago
You might try to select each flasheff and its target and convert them together into a movieclip. This should do the trick and everything should work fine from there.by kneo - FlashEff 2.0
Re: Why i have to embed the font ? and add chinese support please ! - 12 years ago
You need to embed the font because dynamic textfields needs that, and flasheff only can be applied on dynamic fonts.by kneo - FlashEff 2.0
Re: Problem with preset on effect blur - 12 years ago
You can get the code(what values were set for the effect's settings) for the second predefined preset of the blur effect if you will go to FlashEff online panel select the second preset for the blur effect and copy the code which you will need to paste in the actions panel of the fla file. I assume you are a premium plus user right?by kneo - FlashEff 2.0
Re: Problem with preset on effect blur - 12 years ago
those are predefined presets(created by editing the settings of an effect) and not some property that you can change or set. In order to obtain the second predefined preset use the online panel ( ) to copy the code and then to paste it in your file.by kneo - FlashEff 2.0
Re: Problem with preset on effect blur - 12 years ago
Are you talking about the predefined presets of an effect or about the property preset itself which is an entire different thing?by kneo - FlashEff 2.0
Re: Problem with preset on effect blur - 12 years ago
Sorry but I'm not sure what you mean by that. FESBlur effect don't have a property preset. If you are a premium plus user, you could easily see that when you go to edit settings(there won't be any preset property).by kneo - FlashEff 2.0
Re: Problem with preset on effect blur - 12 years ago
The problem is that FESBlur effect doesn't contain a property preset, so an error is thrown.by kneo - FlashEff 2.0
Re: Button to control Hide Effect and Show effect - 12 years ago
The same thing, add a button on the stage and add on it ROLL_OVER event. When the event triggers just call hide() method on FlashEff component.by kneo - FlashEff 2.0
Re: FlashEff Nano transitions… - 12 years ago
FlashEff Nano is a separate standalone component which needs to be installed separately. You can find the mxp file for it in the component's package.by kneo - FlashEFf Nano
Re: FlashEff 2 file sizes are too big for ad agency restrictions - 12 years ago
Karen, I'm afraid that FlashEff Nano doesn't have a testing version, so you won't be able to test it. You will just need to buy it first.by kneo - FlashEff 2.0
Re: PLEASE HELP ME ! (FLASHEFF CAN NOT USE THE NEXT FRAME) - 12 years ago
I deleted the link with the file from your post, since this is a public forum and everyone who would download the fla file will get access to the premium version of flasheff. Please do not post or attach files on public section in which you are using the premium version of flasheff. Regarding your problem please send us the the fla file saved in CS5 format. We wrote you back through email as weby kneo - FlashEff 2.0
Re: Text effect repeats - 12 years ago
If you have several frames inserted in your file you will need to call the stop() method on the last frame.by kneo - FlashEff 2.0
Re: Compatible with Flex 4.5? - 12 years ago
David, Did you take a look at this post as well ? The solution from there surely should work even though you are trying to apply the effect on a textfield instead of an image.by kneo - FlashEff 2.0 Flex
Re: How to remove the "FLASH eff" water mark from object? - 12 years ago
Ana, You already have the free version which you can test and evaluate before getting to buy the premium version. The watermark is only displayed on the trial/free version. The full license doesn't contain the watermark. Mario, That means you are using the free version. Go to your jumpeyecomponents account->my downloads, download the component from there, install it and replace it in yourby kneo - FlashEff 2.0
Re: Gaia framework doesnt work with FlashEff - 12 years ago
We cannot guarantee that the component will work fine with any other software except the ones that we mentioned in the requirements section. However a few moments ago I just tested flasheff with Gaia and everything worked fine. Basically I created a swf in which I applied a flasheff effect on an image. Then I uploaded the swf in a gaia project. Everything worked fine. This means that the problemby kneo - FlashEff 2.0
Re: Animation fails when it loops - 12 years ago
Did you start by leaving a blank keyframe on the flasheff layer? Try to do that and everything should work fine. Also in the component's package there is a manual( Tutorials.pdf) in which is explain step by step what you need to do in order to create a looping animation. Also in the tutorial folder you will have an example based on the steps from the tutorial manual.by kneo - FlashEff 2.0
Re: GPU support - 12 years ago
I'm afraid that flasheff doesn't support GPU acceleration and probably it will neither support in the immediate future.by kneo - FlashEff 2.0 Flex
Re: Gaia framework doesnt work with FlashEff - 12 years ago
I'm not familiar with Gaia but you should try the solution that was given here and perhaps it will work.by kneo - FlashEff 2.0
Re: FlashEFf Nano - 12 years ago
The panel won't work and display anything if you are behind a proxy connection or if your firewall is blocking flash from accessing the internet. Make sure that these conditions don't apply to your system and everything should work fine. If is not your case, could you please make some screen shots with the panel and the component selected on the stage? Thank you.by kneo - FlashEFf Nano
Re: FlashEFf Nano - 12 years ago
Did you add the flasheff nano instance on the stage and did you select it?by kneo - FlashEFf Nano
Re: Problems to install FlashEff Unlimited - 12 years ago
See this post regarding your issue:by kneo - FlashEff 2.0
Re: FLASHEFF NOT WORKING - 12 years ago
Please check my answer in the post from above.by kneo - FlashEff 2.0
Re: FlashEff still doesn't appear ! - 12 years ago
Are you sure that you opened a action script 3 file. If you do and also you opened the extension manager directly from flash the component should be there.by kneo - FlashEff 2.0
Re: Play / Pause Button not stopping effects playing - 12 years ago
I'm afraid that pausing and playing an effect is not possible. You can only play again the effect but from the beginning.by kneo - FlashEff 2.0
Re: Flash eff2 component boxes show up in SWF - 12 years ago
By round coordinates and dimensions I mean that you need to have integer values for x,y, width and height. See this screen captureby kneo - FlashEff 2.0
Re: Does this work with CS4? - 12 years ago
Yes, flasheff component is compatible with Flash CS4.by kneo - FlashEff 2.0
Re: Flash eff2 component boxes show up in SWF - 12 years ago
What you are experiencing usually happens when your target is not added on fixed position on the stage. You will need to put the target object at round coordinates. Also it's quite important as well to have round number for your target's dimension. This could also happens when the zoom in your browser is not set at 100%. Normally if view mode is set at 100% everything will look ok.by kneo - FlashEff 2.0